Description
Fluke ESA612 Calibration
The Fluke ESA612 is an electrical safety analyzer, used to prove that equipment is safe to put into service. Its own calibration is therefore load-bearing in a way most instruments are not: the measurements it produces are the evidence behind a safety determination.
June Company calibrates the Fluke ESA612 for biomedical equipment technicians, safety testing departments, and compliance teams. Every point is measured against reference standards, with as-found readings recorded before any adjustment and as-left readings afterwards, so you can see what condition the instrument was actually in when it arrived.
What we verify on the Fluke ESA612
- Mains voltage measurement and polarity detection.
- Test lead integrity.
- Leakage current measurement across all modes.
- Ground bond resistance and test current.
- Insulation resistance measurement.
- Applied part and patient lead measurements where fitted.
FAQs
Is the calibration traceable? Yes. Every point is measured against reference standards and the results are documented and returned with the instrument.
What if you find a fault during calibration? We stop and quote. There is no point adjusting an instrument that has a hardware fault, so you decide before any repair work begins.
Calibration is documented and returned with the instrument. If we find a fault that calibration cannot correct, we quote the repair before going any further. Email us or submit a service request.
Shipping & Returns
Packing your equipment. You are responsible for packaging equipment adequately for transit. We strongly recommend the original manufacturer’s case, or double-boxing with at least two inches of shock-absorbing material on all six sides. We return your equipment in the packaging it arrived in, so please send it in packaging that will survive the return trip as well. If your packaging is damaged or inadequate for the return, we will substitute suitable packaging and may charge the cost of materials.
Insurance. Equipment is not insured by June Company while in transit. We strongly recommend insuring your shipment for its full replacement value.
Risk of loss. Risk of loss remains with you until your equipment is received at our facility, and transfers back to you when your repaired unit is delivered to the carrier (F.O.B. shipping point). June Company is not responsible for equipment lost, delayed, misdelivered, or damaged in transit, in either direction.
Return label. A prepaid and preprinted return shipping label should be included with your shipment. If one is not included, we will provide one.
Transit damage. Damage occurring in transit is the responsibility of the carrier. It is not a warranty defect and is not covered by the 90-day repair warranty. Any claim must be filed by you with the carrier; we will supply photographs and documentation to support it at no charge.
Full details: Terms & Conditions, Section 6 · Return Policy
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.