Status: Discontinued — All replaced by 190 Series III and 120B Series
Overview
Fluke’s earlier generations of ScopeMeters — including the 190C series, 196/196B/196C, 199/199B/199C, 225C, 215C, and the original 99B — remain in active service across industrial and field applications worldwide. While no longer manufactured, these instruments are still relied upon by technicians who need professional repair and NIST-traceable calibration to maintain measurement confidence. Our technicians have deep experience with every generation of Fluke ScopeMeter hardware, including legacy components that are no longer stocked by Fluke.
Specifications
| Parameter | Value |
|---|---|
| Bandwidth | 20 MHz (99B) / 60 MHz (192C) / 100 MHz (196C, 215C) / 200 MHz (199C, 225C) |
| Channels | 2 isolated inputs |
| Sample Rate | Up to 2.5 GS/s (model dependent) |
| Safety Rating | CAT II 1000 V / CAT III 600 V (varies by model) |
| Key Features | Connect-and-View™ triggering, ScopeRecord™ mode, isolated dual inputs, built-in multimeter, monochrome or color LCD (model dependent) |
Models We Repair
Select your model below to request a repair. If your exact model isn’t listed, choose the closest match — the evaluation and repair process is the same across all Fluke Legacy ScopeMeters configurations.
| Model | Description | Service |
|---|---|---|
| Fluke 99B | Original compact ScopeMeter, 20 MHz bandwidth | Request Repair |
| Fluke 192C | 60 MHz, 2-channel color ScopeMeter | Request Repair |
| Fluke 192E/003 | 192C European variant | Request Repair |
| Fluke 196/003 | 100 MHz, 2-channel (European power cord) | Request Repair |
| Fluke 196B | 100 MHz, 2-channel (B revision) | Request Repair |
| Fluke 196B/003 | 196B European variant | Request Repair |
| Fluke 196C | 100 MHz, 2-channel color display | Request Repair |
| Fluke 199B | 200 MHz, 2-channel (B revision) | Request Repair |
| Fluke 199C | 200 MHz, 2-channel color display | Request Repair |
| Fluke 199C/003 | 199C European variant | Request Repair |
| Fluke 225C | 200 MHz, 2-channel with bus health and power analysis | Request Repair |
Common Fluke Legacy ScopeMeters Failures We Repair
- Aging electrolytic capacitors causing power supply instability and display flicker
- NiMH battery pack failure — original packs no longer hold useful charge
- Display degradation — older monochrome LCDs losing contrast, color LCDs with backlight failure
- Input channel sensitivity drift from aging analog front-end components
- Rotary selector switch wear causing intermittent function selection
- Firmware EEPROM corruption requiring reprogramming
Our technicians perform component-level diagnostics on every Fluke Legacy ScopeMeters unit. We don’t just replace boards — we identify and repair the specific failed components, saving you the cost of full module replacements when possible.
Calibration
Every Fluke Legacy ScopeMeters repair includes NIST-traceable calibration. We verify bandwidth response, timebase accuracy, vertical accuracy across all input channels, trigger sensitivity, and multimeter functions. You receive a detailed calibration certificate documenting measured performance against Fluke’s published specifications.
Who Uses the Fluke Legacy ScopeMeters?
The Fluke 190C / 196 / 199 / 225C / 99B Legacy ScopeMeter Models are used by industrial maintenance technicians, legacy equipment operators, vocational training programs, and military/government facilities maintaining existing instrument fleets.
Our Repair Process
- Ship Your Instrument: Send your Fluke Legacy ScopeMeters to our facility from anywhere in the US. We provide prepaid shipping labels on request.
- Free Evaluation: Our technicians perform a complete diagnostic assessment and provide a firm, no-obligation repair quote.
- Expert Repair: Upon approval, we perform component-level repair using OEM-grade parts.
- NIST-Traceable Calibration: Full calibration with documented results across all critical parameters.
- Return Shipment: Your instrument is securely packaged and returned with calibration certificate, repair documentation, and our 90-day warranty.
Request a Repair
Contact us for professional Fluke Legacy ScopeMeters repair and calibration. Our team is ready to evaluate your instrument and provide a no-obligation quote.
Email: info@junecompany.com | All repairs include a 90-day parts and labor warranty.
