Status: Discontinued — Replaced by 190 Series III
Overview
The Fluke 190 Series II was the predecessor to today’s 190 Series III. These were the first two and four-channel portable oscilloscopes safety rated CAT III 1000 V / CAT IV 600 V. Though discontinued, the 190 Series II remains widely deployed in industrial facilities worldwide, and many units still require professional repair and calibration to maintain field accuracy. All core features including TrendPlot™, ScopeRecord™, Connect-and-View™ triggering, and isolated inputs are present in this generation.
Specifications
| Parameter | Value |
|---|---|
| Bandwidth | 60 MHz / 100 MHz / 200 MHz / 500 MHz |
| Channels | 2 or 4 independently isolated inputs |
| Sample Rate | Up to 5 GS/s (model dependent) |
| Memory | 10,000 samples per channel |
| Safety Rating | CAT III 1000 V / CAT IV 600 V |
| Key Features | Connect-and-View™, ScopeRecord™, TrendPlot™ (up to 22 days), 100-screen replay, waveform compare, IP-51 rated |
Models We Repair
Select your model below to request a repair. If your exact model isn’t listed, choose the closest match — the evaluation and repair process is the same across all Fluke 190 Series II configurations.
| Model | Description | Service |
|---|---|---|
| Fluke 190-062 | 60 MHz, 2-channel with DMM | Request Repair |
| Fluke 190-062/S | 60 MHz, 2-channel with FlukeView software kit | Request Repair |
| Fluke 190-102 | 100 MHz, 2-channel with DMM | Request Repair |
| Fluke 190-102/S | 100 MHz, 2-channel with FlukeView software kit | Request Repair |
| Fluke 190-104 | 100 MHz, 4-channel | Request Repair |
| Fluke 190-104/S | 100 MHz, 4-channel with FlukeView software kit | Request Repair |
| Fluke 190-202 | 200 MHz, 2-channel with DMM | Request Repair |
| Fluke 190-202/S | 200 MHz, 2-channel with FlukeView software kit | Request Repair |
| Fluke 190-204 | 200 MHz, 4-channel | Request Repair |
| Fluke 190-204/S | 200 MHz, 4-channel with FlukeView software kit | Request Repair |
| Fluke 190-502 | 500 MHz, 2-channel with DMM | Request Repair |
| Fluke 190-502/S | 500 MHz, 2-channel with FlukeView software kit | Request Repair |
| Fluke 190-504 | 500 MHz, 4-channel | Request Repair |
| Fluke 190-504/S | 500 MHz, 4-channel with FlukeView software kit | Request Repair |
Common Fluke 190 Series II Failures We Repair
- Input channel degradation after years of high-voltage industrial measurements
- Li-ion battery pack capacity loss — original BP290/BP291 packs losing charge
- Display backlight dimming or color shift from aging CCFL/LED backlights
- USB interface connector wear from years of data transfer activity
- Trigger instability on complex signals due to aging analog front-end components
- Memory corruption causing lost ScopeRecord sessions
Our technicians perform component-level diagnostics on every Fluke 190 Series II unit. We don’t just replace boards — we identify and repair the specific failed components, saving you the cost of full module replacements when possible.
Calibration
Every Fluke 190 Series II repair includes NIST-traceable calibration. We verify bandwidth response, timebase accuracy, vertical accuracy across all input channels, trigger sensitivity, and multimeter functions. You receive a detailed calibration certificate documenting measured performance against Fluke’s published specifications.
Who Uses the Fluke 190 Series II?
The Fluke 190 Series II ScopeMeter Test Tools are used by plant maintenance engineers, industrial electricians, power electronics technicians, automation engineers, and motor drive service teams.
Our Repair Process
- Ship Your Instrument: Send your Fluke 190 Series II to our facility from anywhere in the US. We provide prepaid shipping labels on request.
- Free Evaluation: Our technicians perform a complete diagnostic assessment and provide a firm, no-obligation repair quote.
- Expert Repair: Upon approval, we perform component-level repair using OEM-grade parts.
- NIST-Traceable Calibration: Full calibration with documented results across all critical parameters.
- Return Shipment: Your instrument is securely packaged and returned with calibration certificate, repair documentation, and our 90-day warranty.
Request a Repair
Contact us for professional Fluke 190 Series II repair and calibration. Our team is ready to evaluate your instrument and provide a no-obligation quote.
Email: info@junecompany.com | All repairs include a 90-day parts and labor warranty.
