Fluke 9170-E-R-156 Repair

$245.00 evaluation fee

🛡️ 90-Day Warranty ✓ Fee Credited to Repair ⚡ No Forms Needed

June Company delivers precision Fluke 9170-E-R-156 repair with traceable calibration documentation. Critical for field calibration technicians, process instrument techs, pharmaceutical validation teams, and food safety auditors who depend on reliable fluke dry well calibrator performance.

Helpful Resources

📋 How It Works

Submit Request – Pay evaluation fee & provide equipment details
Ship to Us – Send your equipment to our Oregon facility
We Evaluate – Detailed diagnosis & repair estimate
Fee Credited – Your evaluation fee applies to repair cost
We Repair – Professional repair with 90-day warranty

🔧 Fast Turnaround: Most repairs are completed within 1–3 business days.
📏 Precision Calibration: NIST-traceable calibrations included for most repairs.
🛡️ Warranty: 90-day warranty on all repairs.
📝 Transparency: Detailed evaluation and repair estimate before work begins.

✓ Evaluation Fee Credited Toward Repair

This evaluation fee is applied as credit toward your final repair cost. After we evaluate your equipment, you'll receive a detailed estimate before any repair work begins.

Description

Fluke 9170-E-R-156 Repair

The Fluke 9170-E-R-156 is a dry-block temperature calibrator – it heats and cools a metal block to a commanded temperature, and probes under test sit in a drilled insert inside that block. There is no liquid, which makes it portable and clean, but it also means the block’s uniformity and stability are doing all the work that a stirred fluid would otherwise do. The E designation identifies the insert bore configuration supplied with this unit, which determines what probe diameters it accepts. This is the reference variant, carrying an internal reference thermometer, so the reference input and its accuracy are verified alongside the block itself.

The Fluke 9170-E-R-156 is repaired at June Company by technicians who work on temperature calibration equipment daily, for instrument technicians, calibration laboratories, process plant metrology teams, and field service engineers. Every instrument is repaired at component level and verified against reference standards before it ships back, with the measured results documented.

Common Fluke 9170-E-R-156 problems we fix

Serial, USB or remote-control communication failures – which breaks automated calibration sequences while the instrument still works manually.
Stability or uniformity outside specification – the specification that actually matters on a dry well – a block that reaches temperature but varies across its depth quietly invalidates every calibration performed in it.
Heater element failure or slow heating.
Temperature unstable or overshooting setpoint – the control loop – a source that will not settle cannot be used for calibration at all, however accurate its readout claims to be.
Will not reach low setpoints – the cooling path, which fails independently of the heater and is easy to miss if only high-temperature points get checked.
Over-temperature cutout tripping prematurely.
Insert bore damaged, corroded, or seized – a probe that will not withdraw cleanly, or a bore no longer making proper thermal contact.
Display, keypad or interface faults.

FAQs

Do you service units past manufacturer support? Yes. Much of the temperature equipment we see is out of support, and component-level repair is what that situation needs.

It reaches the setpoint but my readings still disagree – what is wrong? Usually uniformity rather than the setpoint. The block can be at temperature on average while varying enough across the insert to move your reading, and that is measurable and correctable.

Every repair carries a 90-day parts-and-labor warranty, with a firm quote before any work begins. Email us or submit a service request.

Brand

Fluke Repair

Shipping & Returns

Packing your equipment. You are responsible for packaging equipment adequately for transit. We strongly recommend the original manufacturer’s case, or double-boxing with at least two inches of shock-absorbing material on all six sides. We return your equipment in the packaging it arrived in, so please send it in packaging that will survive the return trip as well. If your packaging is damaged or inadequate for the return, we will substitute suitable packaging and may charge the cost of materials.

Insurance. Equipment is not insured by June Company while in transit. We strongly recommend insuring your shipment for its full replacement value.

Risk of loss. Risk of loss remains with you until your equipment is received at our facility, and transfers back to you when your repaired unit is delivered to the carrier (F.O.B. shipping point). June Company is not responsible for equipment lost, delayed, misdelivered, or damaged in transit, in either direction.

Return label. A prepaid and preprinted return shipping label should be included with your shipment. If one is not included, we will provide one.

Transit damage. Damage occurring in transit is the responsibility of the carrier. It is not a warranty defect and is not covered by the 90-day repair warranty. Any claim must be filed by you with the carrier; we will supply photographs and documentation to support it at no charge.

Full details: Terms & Conditions, Section 6 · Return Policy