Fluke 125B Scopemeter Repair

$245.00

🛡️ 90-Day Warranty ✓ Fee Credited to Repair ⚡ No Forms Needed

Professional Fluke Scopemeter 125B repair by certified technicians. We address trigger circuit faults and other common scopemeter faults.

Helpful Resources

📋 How It Works

Submit Request – Pay evaluation fee & provide equipment details
Ship to Us – Send your equipment to our Oregon facility
We Evaluate – Detailed diagnosis & repair estimate
Fee Credited – Your evaluation fee applies to repair cost
We Repair – Professional repair with 90-day warranty

🔧 Fast Turnaround: Most repairs are completed within 1–3 business days.
📏 Precision Calibration: NIST-traceable calibrations included for most repairs.
🛡️ Warranty: 90-day warranty on all repairs.
📝 Transparency: Detailed evaluation and repair estimate before work begins.

✓ Evaluation Fee Credited Toward Repair

This evaluation fee is applied as credit toward your final repair cost. After we evaluate your equipment, you'll receive a detailed estimate before any repair work begins.

Description

Fluke 125B Scopemeter Repair

The Fluke 125B is an industrial handheld ScopeMeter – an oscilloscope, multimeter and recorder in one sealed body, built to be carried onto a plant floor rather than set on a bench. The design prioritises surviving the environment, so its faults are usually the consequences of that environment rather than of the electronics ageing.

June Company’s certified technicians repair the Fluke 125B for industrial electricians, automation technicians, field service engineers, and maintenance troubleshooters. Every instrument is repaired at component level and verified against reference standards before it ships back, with the measured results documented.

Common Fluke 125B problems we fix

Keypad or rotary control unresponsive.
Measurements drifted out of tolerance – the measurement path, corrected and verified against reference standards.
Connect-and-View auto-trigger not locking on a signal.
Case seals or input jacks damaged.
Channel dead, noisy, or reading inaccurately – input front-end damage, almost always from an over-range or transient input, repaired at component level and the channel re-verified.
Display failure – blank, dim, or degraded LCD – on the older ScopeMeters this often shows as banding or a faded centre before it fails outright.
Will not power on or hold charge – the battery pack and the charging circuit, tested separately since either can present as a dead instrument.
Waveform will not trigger or hold steady – the trigger circuit, which is what turns a scope into an unusable one while every other function still appears to work.

FAQs

Are the measurements verified after repair? Yes, against reference standards, with the measured results documented and returned with the instrument.

It powers up but will not trigger reliably on anything – fixable? Yes. That points at the trigger circuit rather than the inputs, and it is repairable at component level.

Every repair carries a 90-day parts-and-labor warranty, with a firm quote before any work begins. Email us or submit a service request.