Fluke Ti200 Thermal Imager Repair

$245.00 evaluation fee

🛡️ 90-Day Warranty ✓ Fee Credited to Repair ⚡ No Forms Needed

📋 How It Works

Submit Request – Pay evaluation fee & provide equipment details
Ship to Us – Send your equipment to our Oregon facility
We Evaluate – Detailed diagnosis & repair estimate
Fee Credited – Your evaluation fee applies to repair cost
We Repair – Professional repair with 90-day warranty

🔧 Fast Turnaround: Most repairs are completed within 1–3 business days.
📏 Precision Calibration: NIST-traceable calibrations included for most repairs.
🛡️ Warranty: 90-day warranty on all repairs.
📝 Transparency: Detailed evaluation and repair estimate before work begins.

✓ Evaluation Fee Credited Toward Repair

This evaluation fee is applied as credit toward your final repair cost. After we evaluate your equipment, you'll receive a detailed estimate before any repair work begins.

Category: Fluke Thermal Imager Repair

Description

Fluke Ti200 Thermal Imager Repair

The Fluke Ti200 is a general-purpose handheld thermal imager, the tier most industrial thermography actually runs on – enough resolution and accuracy for electrical inspection, motor and bearing checks and mechanical surveys, in a body designed to be carried around a plant all day.

June Company repairs and calibrates the Fluke Ti200 for maintenance technicians, electrical contractors, predictive maintenance teams, and plant engineers. Every imager is repaired at component level and its temperature accuracy verified against reference standards before it ships back, with the measured results documented.

Common Fluke Ti200 problems we fix

Dead pixels or fixed pattern noise – microbolometer detector faults, which show as permanent spots or a grid pattern that no amount of re-focusing clears.
Image degrading between shutter cycles – the internal NUC shutter, which recalibrates the detector every few minutes – when it sticks the image drifts and blotches until the unit is power-cycled.
Temperature readings drifted – the measurement path rather than the image – a picture that looks fine can still be reporting the wrong number.
Focus mechanism stiff, slipping, or failing to hold.
Visible-light camera or IR-Fusion blending faults.
Display or touchscreen failure.
Battery will not hold charge or unit will not power on – the pack, the charging circuit and the power section, tested separately.
Images not saving or SD card not recognized.
Damaged germanium lens or coating – scratches and coating loss, which reduce transmission and shift readings low.

FAQs

Do you handle imagers that were dropped? Yes. Impact damage tends to affect the lens assembly, the display and the detector mount, and all three are repairable.

My readings are low across the board but the image looks normal – why? Often lens transmission rather than the detector. A scratched or degraded germanium lens passes less energy and everything reads cold.

Every repair carries a 90-day parts-and-labor warranty, with a firm quote before any work begins. Email us or submit a service request.

Brand

Fluke Repair

June Company repairs and calibrates Fluke test tools across many product families, from handheld meters to lab standards. Each family has its own page listing the models we work on, the faults that bring them in, and what the calibration checks. Meters and scopes: 80V Series multimeters, 280 Series logging meters, the 187 and 189, bench multimeters, ProcessMeters, 190 Series III, 190 Series II, 120B and older ScopeMeters, plus the MDA motor drive analyzers. Power quality: the 1770 and 430 analyzers, the 1730, 1740 and 1750/1760 loggers, and Norma power analyzers. Calibrators and metrology: 5500 and 5700 calibrators, oscilloscope, power quality and electrical tester calibrators, measurement standards, process, loop, pressure and temperature calibrators, pressure modules and controllers, reference thermometers, dry wells and calibration baths. Thermal imaging: Ti PRO, TiX, TiS, TiR, RSE and discontinued Ti cameras. Calibration after repair is NIST-traceable, and repairs carry a 90-day parts-and-labor warranty. Your exact model is in the product list below.

Shipping & Returns

Packing your equipment. You are responsible for packaging equipment adequately for transit. We strongly recommend the original manufacturer’s case, or double-boxing with at least two inches of shock-absorbing material on all six sides. We return your equipment in the packaging it arrived in, so please send it in packaging that will survive the return trip as well. If your packaging is damaged or inadequate for the return, we will substitute suitable packaging and may charge the cost of materials.

Insurance. Equipment is not insured by June Company while in transit. We strongly recommend insuring your shipment for its full replacement value.

Risk of loss. Risk of loss remains with you until your equipment is received at our facility, and transfers back to you when your repaired unit is delivered to the carrier (F.O.B. shipping point). June Company is not responsible for equipment lost, delayed, misdelivered, or damaged in transit, in either direction.

Return label. A prepaid and preprinted return shipping label should be included with your shipment. If one is not included, we will provide one.

Transit damage. Damage occurring in transit is the responsibility of the carrier. It is not a warranty defect and is not covered by the 90-day repair warranty. Any claim must be filed by you with the carrier; we will supply photographs and documentation to support it at no charge.

Full details: Terms & Conditions, Section 6 · Return Policy