Von Corp XF16-1280v.2 TDR Hipot Thumper Repair

Von Corp. XF16-1280 Arc Reflection System Repair

$245.00 evaluation fee

🛡️ 90-Day Warranty ✓ Fee Credited to Repair ⚡ No Forms Needed

Factory-level Von Corp. XF16-1280 repair with NIST-traceable calibration. We restore full performance for chopped wave and voltage divider functions.

Helpful Resources

📋 How It Works

  1. Submit Request – Pay evaluation fee & provide equipment details
  2. Ship to Us – Send your equipment to our Oregon facility
  3. We Evaluate – Detailed diagnosis & repair estimate
  4. Fee Credited – Your evaluation fee applies to repair cost
  5. We Repair – Professional repair with 90-day warranty
  • 🔧 Fast Turnaround: Most repairs are completed within 1–3 business days.
  • 📏 Precision Calibration: NIST-traceable calibrations included for most repairs.
  • 🛡️ Warranty: 90-day warranty on all repairs.
  • 📝 Transparency: Detailed evaluation and repair estimate before work begins.
✓ Evaluation Fee Credited Toward Repair

This evaluation fee is applied as credit toward your final repair cost. After we evaluate your equipment, you'll receive a detailed estimate before any repair work begins.

Category: Tags: , , , , , , , , , , , , , , , , ,

Description

Von Corp. XF16-1280 Arc Reflection System Repair

The Von Corp. XF16-1280 Arc Reflection System is a hipot tester – it applies a high AC or DC voltage across insulation and watches the leakage current for a breakdown. It is a safety instrument, which changes the stakes on its accuracy: a tester that quietly under-delivers voltage passes everything put in front of it.

June Company repairs and calibrates the Von Corp. XF16-1280 Arc Reflection System for production test departments, electrical safety teams, panel builders, and compliance laboratories. Every instrument is repaired at component level and verified against reference standards before it ships back, with the measured results documented.

Common Von Corp. XF16-1280 Arc Reflection System problems we fix

  • Display, keypad or front-panel faults.
  • GPIB, LAN, USB or remote-control faults – which breaks automated test sequences while the instrument still works from the front panel.
  • Test voltage low or not reaching setpoint – the most consequential fault on a safety tester, because under-voltage produces a pass on equipment that should have failed and nothing on the display indicates it.
  • Leakage current measurement inaccurate.
  • Arc detection not triggering or triggering falsely.
  • High-voltage transformer or output stage faults.
  • Safety interlock or ground-continuity circuit failure.
  • Ramp and dwell timing errors.
  • HV lead, probe or connector damage.

FAQs

It passes everything I test. Is that suspicious? It can be. An under-delivering hipot passes equipment that should fail, and that is exactly the failure mode worth ruling out.

What if it is not economical to repair? We tell you in the quote. The evaluation is free and there is no obligation to proceed.

Every repair carries a 90-day parts-and-labor warranty, with a firm quote before any work begins. Email us or submit a service request.

Brand

Von Corp. Repair

Von Corporation is a company specializing in manufacturing test equipment for high-voltage electrical systems, primarily focused on testing, maintaining, and diagnosing electrical apparatuses in the utility and industrial sectors. Here are some of the key products offered by Von Corp. and their functionalities:
  1. High Voltage AC and DC Test Sets:
    • Portable AC Hipot Testers: Used to apply high AC voltage to electrical equipment and cables to test the integrity of their insulation. These testers ensure that the equipment can handle operational voltages without breakdown.
    • Portable DC Hipot Testers: Similar to AC Hipot testers, but apply high DC voltage for insulation testing of cables, motors, and other electrical components.
  2. Cable Fault Locators:
    • Devices used to locate faults in underground and aerial cables. They help pinpoint the exact location of faults, reducing the time and cost associated with cable repairs.
  3. VLF (Very Low Frequency) Testers:
    • VLF testers are used for testing the insulation of high-voltage cables and electrical apparatuses. VLF testing is a preferred method for testing long cables and is less stressful to the insulation than traditional DC testing.
  4. Transformer Test Equipment:
    • Equipment designed to test the condition and performance of power transformers. These tests typically include insulation resistance, turns ratio, and winding resistance tests.
  5. Insulation Resistance Testers:
    • Instruments used to measure the resistance of electrical insulation, ensuring that it is adequate to prevent leakage currents and potential failures.
  6. TTR (Transformer Turns Ratio) Testers:
    • Devices that measure the turns ratio of transformers to ensure that the primary and secondary windings have the correct ratio, which is critical for proper transformer operation.
  7. Circuit Breaker Test Equipment:
    • Testers designed to analyze and test the performance of circuit breakers. These tests include timing, contact resistance, and motion analysis to ensure circuit breakers operate correctly during fault conditions.
  8. Ground Resistance Testers:
    • Instruments used to measure the resistance of grounding systems. Proper grounding is crucial for the safety and stability of electrical systems.
  9. Partial Discharge Testers:
    • Equipment used to detect and analyze partial discharges in high-voltage equipment, helping to identify insulation defects and prevent failures.
  10. Portable Test Sets:
    • Versatile, portable test sets that combine multiple testing functionalities in one unit, such as Hipot testing, insulation resistance testing, and ground resistance testing.
Von Corporation’s products are essential for utilities, industrial plants, and electrical contractors to ensure the safety, reliability, and efficiency of their electrical systems. Their equipment is used for commissioning new installations, performing routine maintenance, and troubleshooting faults in electrical apparatuses.

Shipping & Returns

Packing your equipment. You are responsible for packaging equipment adequately for transit. We strongly recommend the original manufacturer’s case, or double-boxing with at least two inches of shock-absorbing material on all six sides. We return your equipment in the packaging it arrived in, so please send it in packaging that will survive the return trip as well. If your packaging is damaged or inadequate for the return, we will substitute suitable packaging and may charge the cost of materials.

Insurance. Equipment is not insured by June Company while in transit. We strongly recommend insuring your shipment for its full replacement value.

Risk of loss. Risk of loss remains with you until your equipment is received at our facility, and transfers back to you when your repaired unit is delivered to the carrier (F.O.B. shipping point). June Company is not responsible for equipment lost, delayed, misdelivered, or damaged in transit, in either direction.

Return label. A prepaid and preprinted return shipping label should be included with your shipment. If one is not included, we will provide one.

Transit damage. Damage occurring in transit is the responsibility of the carrier. It is not a warranty defect and is not covered by the 90-day repair warranty. Any claim must be filed by you with the carrier; we will supply photographs and documentation to support it at no charge.

Full details: Terms & Conditions, Section 6 · Return Policy

Related products