Description
Amplifier Research ATP10K100M Field Generator Repair and Calibration
The Amplifier Research ATP10K100M is an RF field-generating system — it combines amplifier and antenna elements to generate calibrated RF fields for EMC radiated-immunity testing. As an RF power instrument, its faults concentrate in the RF output/amplifier stage, the field-generation hardware, and the control and leveling electronics.
June Company repairs and calibrates the AR ATP10K100M for EMC test labs and RF compliance teams.
Common AR ATP10K100M problems we fix
- Low or no RF field output — amplifier/output-stage failure, the defining fault, repaired so it generates rated field strength.
- Field level / leveling inaccurate — leveling-loop drift that throws off the calibrated field, recalibrated.
- Goes into fault or shutdown — power or protection faults, repaired.
- Overheats under drive — thermal-management service.
- Control or interface faults.
FAQs
My field output is low — repairable? Yes. RF output-stage faults are the usual cause and they’re repairable, then verified so the system generates rated, calibrated field strength, with a NIST-traceable certificate.
Is the field level certified? Yes — verified against our standards.
Every repair includes NIST-traceable calibration and a 90-day parts-and-labor warranty. Email us or submit a service request.
Shipping & Returns
Packing your equipment. You are responsible for packaging equipment adequately for transit. We strongly recommend the original manufacturer’s case, or double-boxing with at least two inches of shock-absorbing material on all six sides. We return your equipment in the packaging it arrived in, so please send it in packaging that will survive the return trip as well. If your packaging is damaged or inadequate for the return, we will substitute suitable packaging and may charge the cost of materials.
Insurance. Equipment is not insured by June Company while in transit. We strongly recommend insuring your shipment for its full replacement value.
Risk of loss. Risk of loss remains with you until your equipment is received at our facility, and transfers back to you when your repaired unit is delivered to the carrier (F.O.B. shipping point). June Company is not responsible for equipment lost, delayed, misdelivered, or damaged in transit, in either direction.
Return label. A prepaid and preprinted return shipping label should be included with your shipment. If one is not included, we will provide one.
Transit damage. Damage occurring in transit is the responsibility of the carrier. It is not a warranty defect and is not covered by the 90-day repair warranty. Any claim must be filed by you with the carrier; we will supply photographs and documentation to support it at no charge.
Full details: Terms & Conditions, Section 6 · Return Policy
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.