Status: Phenix Technologies test equipment repair covers the HC circuit-breaker and high-current sets, MTS motor test systems, the PM15-4A insulation analyzer, and the TTS10M transformer test set. We repair and calibrate all of them.
Common Phenix Specialty Test Equipment Problems We Fix
- HC won’t reach rated current — high-current output transformer or bus-bar degradation
- HC current reading off — current transformer and metering circuit drift
- MTS surge test won’t fire — surge generator output stage failure
- MTS hipot won’t reach voltage — HV hipot circuit failure
- MTS winding resistance unstable — measurement circuit drift
- PM15-4A won’t reach test voltage — HV insulation-resistance source degradation
- TTS10M ratio readings off — ratio bridge calibration drift
- Any model: control board, display, or power supply failure
Don’t see your exact problem? We repair all Phenix specialty test equipment faults — email us and describe what’s happening.
Phenix Specialty Test Equipment Models We Repair
| Model | Description | Service |
|---|---|---|
| Phenix Technologies HC75C | 7,500 A circuit breaker test set | Request Repair |
| Phenix Technologies HC5 | High-current test set | Request Repair |
| Phenix Technologies HC1 | Circuit breaker test set | Request Repair |
| Phenix Technologies MTS1500R | 1500 V motor test system | Request Repair |
| Phenix Technologies MTS100R | Motor test system | Request Repair |
| Phenix Technologies MTS50NVD | Motor test system | Request Repair |
| Phenix Technologies PM15-4A | 15 kV insulation analyzer | Request Repair |
| Phenix Technologies TTS10M | Transformer test set | Request Repair |
How to Send In Your Phenix Tester
- Tell us what’s wrong. Email us or submit a service request with your model and the problem.
- Ship it to us. Send your instrument from anywhere in the US — we provide prepaid shipping labels on request.
- Get a firm quote. We evaluate it and send a no-obligation repair quote. No work is done until you approve.
Email: info@junecompany.com | All repairs include NIST-traceable calibration and a 90-day parts-and-labor warranty.
Frequently Asked Questions
How much does Phenix Technologies test equipment repair cost?
Repairs start with a flat evaluation fee that’s credited toward your repair cost. After we diagnose the instrument, you get a firm quote before any work begins — no surprises.
How long does the repair take?
Most repairs are finished within 5–10 business days of arrival, with expedited turnaround available if you need it back fast. High-current HC rebuilds and motor-test-system work can run longer — we’ll tell you up front with the quote.
My HC set won’t reach its rated injection current — can you fix it?
Yes. On the HC high-current breaker test sets, output-transformer and bus-bar degradation that keeps the unit from reaching full injection current is the most common fault, and it’s repairable, then verified against our reference standards so it delivers rated amps again.
My MTS surge comparison or hipot test won’t run — is that repairable?
Yes. We service the surge generator, HV hipot, megohm, and winding-resistance circuits on the MTS motor test systems, restored and recalibrated so each test mode runs and reports correctly.
My readings are out of spec — can you recalibrate and certify it?
Yes. Every repair includes recalibration against our reference standards, and the instrument comes back with a NIST-traceable calibration certificate documenting measured performance — the documentation NETA and utility programs require.
Phenix is owned by Doble now — can you still repair these independently?
Yes. Phenix Technologies is now part of Doble Engineering, but these are rugged, serviceable instruments and we repair and recalibrate them independently, often with a faster turnaround than routing through the OEM.
What if my exact model isn’t listed?
We service the full Phenix specialty range — HC circuit-breaker and high-current sets, MTS motor test systems, the PM15-4A analyzer, and the TTS10M transformer set. If your model isn’t in the table, pick the closest match or email us — the process is the same.
Who uses Phenix specialty test equipment?
Electric utilities, power-generation plants, industrial motor-maintenance shops, transformer-service teams, circuit-breaker testing crews, and NETA-certified testing companies rely on the HC, MTS, PM, and TTS instruments for primary current injection, motor testing, insulation analysis, and transformer diagnostics. For full manufacturer details, see Doble’s Phenix high power test systems page.
