Status: Phenix Technologies AC/DC dielectric test set repair covers the current 6CP Series combination AC/DC hipots. We repair and calibrate all of them.
Common Phenix 6CP Series Problems We Fix
- Won’t reach voltage in AC or DC mode — HV transformer or DC multiplier stack failure
- Won’t switch cleanly between AC and DC — mode-switching relay degradation
- Output drifts or sags — voltage regulation circuit drift in either mode
- kV or mA metering reads wrong — metering circuit calibration drift
- Excessive DC ripple — output ripple filter capacitor degradation
- Arcing or leakage at the HV section — cable and connector insulation breakdown
- Erratic control behavior — control circuit component aging
Don’t see your exact problem? We repair all Phenix 6CP Series faults — email us and describe what’s happening.
Phenix Technologies 6CP Series Models We Repair
| Model | Description | Service |
|---|---|---|
| Phenix Technologies 6CP200/100-10 | 200 kVAC / 100 kVDC, 10 kVA | Request Repair |
| Phenix Technologies 6CP120/60-10 | 120 kVAC / 60 kVDC, 10 kVA | Request Repair |
| Phenix Technologies 6CP120/60-7.5 | 120 kVAC / 60 kVDC, 7.5 kVA | Request Repair |
| Phenix Technologies 6CP100/50-10 | 100 kVAC / 50 kVDC, 10 kVA | Request Repair |
| Phenix Technologies 6CP100/50-7.5 | 100 kVAC / 50 kVDC, 7.5 kVA | Request Repair |
| Phenix Technologies 6CP50/10-3 | 50 kVAC / 10 kVDC, 3 kVA | Request Repair |
| Phenix Technologies 6CP30/15-3 | 30 kVAC / 15 kVDC, 3 kVA | Request Repair |
How to Send In Your Phenix 6CP Test Set
- Tell us what’s wrong. Email us or submit a service request with your model and the problem.
- Ship it to us. Send your instrument from anywhere in the US — we provide prepaid shipping labels on request.
- Get a firm quote. We evaluate it and send a no-obligation repair quote. No work is done until you approve.
Email: info@junecompany.com | All repairs include NIST-traceable calibration and a 90-day parts-and-labor warranty.
Frequently Asked Questions
How much does Phenix Technologies AC/DC dielectric test set repair cost?
Repairs start with a flat evaluation fee that’s credited toward your repair cost. After we diagnose the instrument, you get a firm quote before any work begins — no surprises.
How long does the repair take?
Most repairs are finished within 5–10 business days of arrival, with expedited turnaround available if you need it back fast. HV transformer or multiplier-stack rebuilds can run longer — we’ll tell you up front with the quote.
My set works in one mode but not the other — can you fix it?
Yes. AC/DC mode-switching relay degradation that leaves you with only AC or only DC output is a common 6CP fault, and it’s repairable, then verified against our reference standards so both modes hit their rated voltage.
My DC output has too much ripple — is that repairable?
Yes. Ripple-filter capacitor degradation on the DC side is repairable, restored for a clean, low-ripple DC output that gives stable leakage-current readings.
My kV or mA metering looks off — can you recalibrate it?
Yes. Metering drift in either AC or DC mode is repairable and recalibrated against our standards, and the set returns with a NIST-traceable certificate documenting measured accuracy in both modes.
Phenix is owned by Doble now — can you still repair these independently?
Yes. Phenix Technologies is now part of Doble Engineering, but the 6CP combination sets are rugged, serviceable instruments and we repair and recalibrate them independently, often with a faster turnaround than routing through the OEM.
What if my exact model isn’t listed?
We service the full 6CP combination range, from the 30/15 up to the 200/100. If your configuration isn’t in the table, pick the closest match or email us — the process is the same.
Who uses the Phenix 6CP Series?
Electric utilities, NETA-certified testing companies, cable-testing contractors, switchgear commissioning crews, and industrial electrical-maintenance teams rely on the 6CP combination sets because a single portable unit covers both AC withstand and DC hipot testing on cables, transformers, switchgear, and rotating machinery. For full manufacturer details, see Doble’s Phenix AC/DC combo hipot systems page.
