Description
Kubler Encoder Repair
A Kubler encoder is a rotary position/speed feedback device — it mounts to a motor or shaft and outputs incremental or absolute position signals so a drive or controller can track rotation, used throughout automation and motion control. Its faults concentrate in the sensing element (optical/magnetic), the output electronics, the bearing, and the connector/cable.
June Company repairs Kubler encoders for machine builders, automation integrators, and maintenance teams.
Common Kubler encoder problems we fix
- Signal-output degradation — weak, noisy, or missing output signals causing position errors, repaired so the encoder reports correctly.
- Connector / cable damage — a damaged connector or cable entry, repaired.
- Sensing-element faults — the optical or magnetic sensing not reading the code disc/wheel correctly, repaired.
- Bearing wear — roughness or play in the shaft, the bearing serviced.
- Output electronics faults — repaired.
FAQs
My drive faults on this encoder’s signal — fixable? Yes. Signal-output and sensing faults are repairable; we restore the output and verify the encoder reports position correctly, with documented results.
Do you test it after repair? Yes — the encoder’s output is verified before return.
Every repair includes a 90-day parts-and-labor warranty. Email us or submit a service request.
Shipping & Returns
Packing your equipment. You are responsible for packaging equipment adequately for transit. We strongly recommend the original manufacturer’s case, or double-boxing with at least two inches of shock-absorbing material on all six sides. We return your equipment in the packaging it arrived in, so please send it in packaging that will survive the return trip as well. If your packaging is damaged or inadequate for the return, we will substitute suitable packaging and may charge the cost of materials.
Insurance. Equipment is not insured by June Company while in transit. We strongly recommend insuring your shipment for its full replacement value.
Risk of loss. Risk of loss remains with you until your equipment is received at our facility, and transfers back to you when your repaired unit is delivered to the carrier (F.O.B. shipping point). June Company is not responsible for equipment lost, delayed, misdelivered, or damaged in transit, in either direction.
Return label. A prepaid and preprinted return shipping label should be included with your shipment. If one is not included, we will provide one.
Transit damage. Damage occurring in transit is the responsibility of the carrier. It is not a warranty defect and is not covered by the 90-day repair warranty. Any claim must be filed by you with the carrier; we will supply photographs and documentation to support it at no charge.
Full details: Terms & Conditions, Section 6 · Return Policy
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.