Description
Tettex 5288A Resonating Inductor Repair
The Tettex 5288A is a resonating inductor — a precision HV reactor that pairs with a capacitance and tan-delta bridge to bring the measurement circuit into resonance, enabling accurate loss measurement on transformers and bushings. As a precision HV reactor, its value is in its inductance stability and HV integrity, so that’s where service focuses.
June Company repairs and calibrates the Tettex 5288A for HV insulation-diagnostics labs running bridge measurements.
Common Tettex 5288A problems we fix
- Measurement bridge imbalance — inductance drift that prevents the bridge from resonating/balancing correctly, restored so loss measurements are accurate.
- HV insulation breakdown internally — reactor insulation degradation from HV stress, repaired.
- Tap/range selection faults — the inductance-selection mechanism, serviced.
- Terminal or connection faults — HV connections affecting the measurement loop.
FAQs
My bridge won’t balance — could it be the inductor? Yes — inductance drift or an HV fault in the resonating inductor will throw the bridge off. We service it and verify it resonates correctly with your bridge, documented with a NIST-traceable certificate.
Is the HV integrity checked? Yes — insulation integrity is verified before return.
Every repair includes NIST-traceable calibration and a 90-day parts-and-labor warranty. Email us or submit a service request.
Shipping & Returns
Packing your equipment. You are responsible for packaging equipment adequately for transit. We strongly recommend the original manufacturer’s case, or double-boxing with at least two inches of shock-absorbing material on all six sides. We return your equipment in the packaging it arrived in, so please send it in packaging that will survive the return trip as well. If your packaging is damaged or inadequate for the return, we will substitute suitable packaging and may charge the cost of materials.
Insurance. Equipment is not insured by June Company while in transit. We strongly recommend insuring your shipment for its full replacement value.
Risk of loss. Risk of loss remains with you until your equipment is received at our facility, and transfers back to you when your repaired unit is delivered to the carrier (F.O.B. shipping point). June Company is not responsible for equipment lost, delayed, misdelivered, or damaged in transit, in either direction.
Return label. A prepaid and preprinted return shipping label should be included with your shipment. If one is not included, we will provide one.
Transit damage. Damage occurring in transit is the responsibility of the carrier. It is not a warranty defect and is not covered by the 90-day repair warranty. Any claim must be filed by you with the carrier; we will supply photographs and documentation to support it at no charge.
Full details: Terms & Conditions, Section 6 · Return Policy