Status: Megger battery tester repair covers the current TORKEL900-series and BITE5 alongside widely-used earlier BITE, Torkel, and TXL models. We repair and calibrate all of them.
Common Megger Battery Tester Problems We Fix
- Load capacity dropping or “can’t regulate” errors — load resistor bank degradation from sustained discharge testing
- Impedance readings drifting — measurement circuit calibration drift
- Battery clips and leads worn or corroded — connector degradation
- Control board or display not working
- Won’t connect to a PC — USB or RS-232 interface failure
- Overheats or fans ramp during load tests — cooling system failure
- Load measurement reads wrong — internal current shunt drift
Don’t see your exact problem? We repair all Megger battery tester faults — email us and describe what’s happening.
Megger Battery Tester Models We Repair
| Model | Description | Service |
|---|---|---|
| Megger BITE3 | Battery impedance tester, latest generation | Request Repair |
| Megger BITE2P | Battery impedance tester with printer | Request Repair |
| Megger BITE2 | Battery impedance tester | Request Repair |
| Megger BITE5 | Battery tester | Request Repair |
| Megger Torkel 860 | Battery load tester | Request Repair |
| Megger Torkel 840 | Battery load tester | Request Repair |
| Megger Torkel 820 | Battery load tester | Request Repair |
| Megger TXL890 | Battery test system | Request Repair |
| Megger TXL870 | Battery test system | Request Repair |
| Megger TXL830 | Battery load tester | Request Repair |
| Megger BGL | Ground fault locator for battery systems | Request Repair |
| Megger 246100 | Ground fault tracer | Request Repair |
How to Send In Your Megger Battery Tester
- Tell us what’s wrong. Email us or submit a service request with your model and the problem.
- Ship it to us. Send your instrument from anywhere in the US — we provide prepaid shipping labels on request.
- Get a firm quote. We evaluate it and send a no-obligation repair quote. No work is done until you approve.
Email: info@junecompany.com | All repairs include NIST-traceable calibration and a 90-day parts-and-labor warranty.
Frequently Asked Questions
How much does Megger battery tester repair cost?
Repairs start with a flat evaluation fee that’s credited toward your repair cost. After we diagnose the instrument, you get a firm quote before any work begins — no surprises.
How long does the repair take?
Most Megger battery tester repairs are finished within 5–10 business days of arrival, with expedited turnaround available if you need it back fast. Load-bank rebuilds on Torkel and TXL units can run longer — we’ll tell you up front with the quote.
My Torkel won’t hold load or throws a “can’t regulate” error — can you fix it?
Yes. Load resistor bank degradation from sustained high-current discharge testing is the most common Torkel and TXL fault, and it’s repairable, then verified against our reference standards so the unit regulates to its rated current again.
My BITE impedance readings are drifting — can you recalibrate it?
Yes. Impedance measurement circuit drift is repairable and recalibrated, then returned with NIST-traceable results on a certificate.
The battery clips and leads are corroded or damaged — can you replace them?
Yes. Clip, lead, and connector degradation from harsh battery-room environments is a routine repair, restored for reliable, low-resistance connections.
My Torkel overheats or the fans ramp during a test — is that repairable?
Yes. Cooling system faults from extended load testing are common and fully repairable, restored so the unit dissipates heat safely under sustained discharge.
Do you service the older 800-series Torkel and BITE2 units, not just the current models?
Yes. The current line is the TORKEL900 series and BITE5, but the earlier 800-series Torkels, the BITE2/BITE2P/BITE3, and the TXL load units are all fully supported for repair and recalibration.
What if my exact model isn’t listed?
We service the full Megger battery-test range — BITE impedance testers, Torkel and TXL load/discharge units, and the battery-system ground-fault locators. If your model isn’t in the table, pick the closest match or email us — the process is the same. Standby battery banks live alongside the gear we test for insulation faults — we also handle Megger insulation tester repair.
Who uses Megger battery testers?
Substation battery-maintenance crews, data-center UPS test teams, telecom battery-bank operators, utility battery programs, and critical-power facility managers rely on the BITE, Torkel, and TXL line to catch weak cells and verify capacity before a backup system fails, and on independent Megger battery tester repair to keep them in service. For full manufacturer specifications, see Megger’s battery testing product family page.
